Table of Contents
Page
Page
I.Presentation of PSE 1
1 .History 1
2. The Vocational Training Center 1
3 .Location 1
II. The Construction School 2
1. School Structure 2
2. School Objectives 4
3. Admission Criteria 4
4.Course duration 4
5. Instructors 5
6. Partners 6
7. School Facilities 6
III. The Training Programs 6
IV. Student Competency 7
1. 1st year: 7
2. 2nd year 7
V. Course Curriculum 10
1. Subjects of Study 10
2. Technical Module 11
3. Mathematics 28
4. Khmer 32
5. Computer 39
6. Professional Life Training 42
VI. Methodology 45
1. Teaching principles and Intentions 45
a) Teaching principles 45
b) Teaching intentions 45
2. General Training Approach 46
3. Role and Functions of the Trainers 46
a) Planning and Preparation: 46
b) Information and motivation 47
c) Animation, Support and Orientation 47
d) Examinations 47
4. Formative Examination 48
1 .History 1
2. The Vocational Training Center 1
3 .Location 1
II. The Construction School 2
1. School Structure 2
2. School Objectives 4
3. Admission Criteria 4
4.Course duration 4
5. Instructors 5
6. Partners 6
7. School Facilities 6
III. The Training Programs 6
IV. Student Competency 7
1. 1st year: 7
2. 2nd year 7
V. Course Curriculum 10
1. Subjects of Study 10
2. Technical Module 11
3. Mathematics 28
4. Khmer 32
5. Computer 39
6. Professional Life Training 42
VI. Methodology 45
1. Teaching principles and Intentions 45
a) Teaching principles 45
b) Teaching intentions 45
2. General Training Approach 46
3. Role and Functions of the Trainers 46
a) Planning and Preparation: 46
b) Information and motivation 47
c) Animation, Support and Orientation 47
d) Examinations 47
4. Formative Examination 48
- I. Presentation of PSE
Before starting the description of the courses provided by the Construction School, it is important to briefly present the organization of Pour un Sourire d'Enfant.
1 .History
Founded in 1995 by Christian and Marie-France des Pallières, Pour un Sourire d'Enfant (For a Smile of a Child) is a Non-Governmental Organization that supports more than 6,500 young people from the garbage dump of Phnom Penh. This help includes: Social and medical actions for the children and their families Relocation of families to a more decent surrounding
Education in municipal school and in PSE Schooling center
Pour un Sourire d'Enfant received the Human Rights Award in 2000.
2. The Vocational Training Center
The objective of the Vocational Training Center, which has been created in 2000, is to provide professional skills to the selected teenagers in order to equip them with a long-lasting solution for their families’ livelihood on the garbage dump.
For this reason, three training programs have been launched in eight different schools:
Business School
Hairdressing, Beauty care, and spa school
Gardening School
Mechanic School
Construction School
Home and Food management School
Information Technology School
Hotel School
Before entering in one of the training programs, the students have to go through a one-year preparatory class to strengthen their general knowledge (English, Khmer, Mathematics) and to discover the economic environment (visits to companies, business conferences, economic courses).
3 .Location
The Vocational Training Center is located in the area of the garbage dumpsite of Phnom Penh. It also has a strong and active link in Siam Reap and Sihanouk Province.
The aim of the Center in Siam Reap and Sihanouk Province is to welcome the students on internship and the graduated students who work in the two centers. The centers are called Insertion Centers.
II. The Construction School
The Construction School was created in 2007 to absorb preparatory students from classes P1 and P2. Visioning the need for infrastructural development in Cambodia, many companies, local as well as international, have started their construction operation in this country especially in cities and suburbs. They have built not only simple housing but also big hotels and restaurants as well as high rise buildings and huge shopping malls. This resulted in the increasing need of human resources in construction maintenance field, and it is also the reason for the creation of Construction school at PSE. Currently, PSE is working with more than 1,000 enterprises around Cambodia. Many of them have shown their need for high capacity staff and manpower for their business. There has been high demand in skills such as electricity, building painting, tiling, plumbing, and building maintenance. This demand in technician and quality manpower has prompted PSE to create Construction School. Thus three skills are included in PSE’s Construction School:
Electricity Training
Plumbing Training
Tiling and Painting Training
1. School Structure
After completing their preparatory classes, students are carefully selected for the Construction School.
In the Construction School during their first year, first the students have to go through a three months Common Core Syllabus (CCS) to make them ready for their skill training. After finishing CCS, each student can choose to study one of the three skills offered by Construction School which include Electricity (E1), Tiling and Painting (T&P1), and Plumbing (P1); and then the students in their respective field can continue their study in Year2.
Grade 6-8
E1
(Electricity Year1)
8 months
CCS
(Common Core Syllabus Year1 )
3 months
P2
Preparatory Class
Catching-up School
Preparatory Class
(General Education for Training)
Vocational Training Center
P1
(Plumbing Year1)
8 months
T&P1
(Tiling and Painting Year1)
8 months
E2
(Electricity Year2)
8 months
P2
(Plumbing Year2)
8 months
T&P2
(Tiling and Painting Year2)
8 months
2. School Objectives
The mission of the Construction School is to:
a. Offer skillful knowledge to students in order to make them have good jobs and salary with professional behavior when they finish their training
b. Match the quality of the training programs to the expectation of the current job market in Cambodia
3. Admission Criteria
PSE Construction School gives priority to young people of the garbage dumpsite. In the future, the School will also accept other unprivileged young people who meet to the same social criteria defined by PSE. In any case, PSE social team does a social survey before accepting any students. The criteria taken into consideration include:
q Poverty of the family
q Number of members in the family
q Debt and revenue of the family
q Average level of education in the family
After that, the students are tested on their level of general education especially in English, Mathematics and Khmer. The students are also interviewed to see their motivation and their degree of maturity. The school filters for only the students from grade 6 to grade 8 and whose age is 18 years or above.
4. Course Duration
The duration of the course is 2 years including two three-month internships.
- The first three months of the 1st year is common core syllabus where all students learn the basic of the three skills to let them know each skill well before they decide to choose the one in which they are interested.
- 8 months in the 1st year for training their skill
- 3 months of internship (report and presentation required) in construction company or other related organization.
- 8 months in the 2nd year for training their skill.
3 months final internship/pre-hiring internship (report and presentation required) in construction company or related organization.
5. Instructors
As a part of providing good quality technical training, the School believes in having competent staffs who are effective and dedicated to their profession. The school’s trainers are qualified professionals who equipped with both the technical expertise and the pedagogic know-how.
The school also believes in the importance of continually updating and upgrading the technical skill and knowledge of its staffs. There are both internal and external staff development programs for instructors to update and upgrade their skill and knowledge.
No.
Name
Educational Level
Teaching Fields
1
SONG Mongtray
Bachelor of Education
(English Literature); Electrician Specialist Worker
Electricity
2
HOK Thyleang
Electrical Engineering; Junior Technical Teacher; Diploma Degree in Electrical Engineering
Electricity
3
HIN Saohon
Civil Engineering; Technical Diploma of Construction
Tiling
Painting
4
KIM Socheath
Civil Engineering; Technical Diploma of Construction
Tiling
Painting
5
HIM Da
Civil Engineering; Auto Mechanic
Plumbing
6
KOUCH Naravy
Plumbing
6. Partners
In order to provide students with good quality training and to respond to the market need, we work closely with experienced professionals by creating an advisory committee which comprises of local and international companies, NGOs, and other training schools in Cambodia to develop and update our curriculum every year.
Our current partners include:
Local Partners:
1. CANADIA BANK PLC
2. Reaksmey Dara Construction Co., Ltd
3. Sea-Union Construction (Cambodia) Co., Ltd
4. Muhibbah Engineering (Cambodia) Co., Ltd.
5. DBD Engineering Co., Ltd.
6. PURAPOOL
7. Engineering Technical Service
8. Serimongkul Engineering
9. Civil Industry Construction Sithen Co., Ltd
10. Comin Khmere
11. Vimean Chey Groups
12. Maestria Cambodia Co Ltd
13. Jotun Multicolor Center
14. Rockret (Cambodia)
15. Camatec Eng. &Const. Co., Ltd
16. HEK Construction Co., Ltd
17. Schneider Electric Overseas Asia in Cambodia
18. Genting Teamwork Construction & Development Co., Ltd.
19. Private Sub-Constructor
20. Electrical Service
21. KHJ Construction Co., Ltd.
International partners:
1. Comité Central de Coordination de l'Apprentissage (CCCA) in France
2. CFA Toulon France
7. School Facilities
The facilities of PSE Construction School give opportunity to students to work in condition close to the real work environment. All the equipments are modern and regularly renewed to guarantee good working condition. The facilities include:
- Tiling and Painting workshop: The workshop contains 6 booths where students practice inside on painting or tiling. This workshop is able to allow 18 students to practice in.
- Tiling and Painting store: located beside tiling and painting workshop, the store is equipped with tools and material for training and small tiling and painting project in PSE center.
- Electricity workshop: The workshop contains 6 booths where students practice inside on electricity. This workshop is able to allow 18 students to practice in.
- Electricity store: located beside electricity workshop, the store is equipped with tools and material for training and small electrical project in PSE center.
- Plumbing workshop: The workshop contains 12 booths where students practice inside on plumbing. This workshop is able to allow 18 students to practice in.
- Plumbing store: located beside plumbing workshop, the store is equipped with tools and material for training and small plumbing project in PSE center.
III. The Training Programs
The Construction School offers three training programs which include Electricity, Tiling and Painting, and Plumbing. The training for each skill takes students two years to complete. After finishing each academic year, students must go to an internship before they can continue to the next academic year or graduate their study. Therefore, through their two-year study, they have to engage in internship twice.
Class
Training Duration
Training Period
Internship Duration
Internship Period
Common Core Syllabus
3 months
September – November
N/A
N/A
Year 1
8 months
December – July
3 months
August – October
Year 2
8 months
November – June
3 months
July – September
Total
19 months
6 months
IV. Student Competency
A. Electricity Training
1st year:
After 1st year of Electricity Training, the students will be able to:
· Install simple lighting system
· Install three gangs and two-way switch
· Install four gangs one-way switch
· Install automatic timer
· Install electrical conduit and wire
· Install home electrical system
· Install auto pumping system
· Install dimmer
· Install latching relay
· Install Main distribution box
2nd year
After 2nd year of Electricity Training Students will be able to:
· Install tri-phase motor controlling system
· Install electric motor control in star-delta
B. Tiling and Painting Training
1st year:
After 1st year of Tiling and Painting Training, the students will be able to:
· Identify several kinds of painting
· Read technical drawing
· Use tiling and painting tools and materials
· Use all kind of plasters
· Make projection painting
· Repaint the old painted wall
· Use several kinds of paints
· Mix color paint
· Define harmonious color
· Tile normal floor tiling, picture floor tiling
· Tile normal wall tiling, picture wall tiling
· Design tiling
· Mix mortar
· Install tiles in bath room
· Install decoration tiles
2nd year
After 2nd year of Tiling and Painting Training Students will be able to:
· Realize floor decoration tiling
· Realize wall decoration tiling
· Design and decorate color tiling
· Plaster and paint
· Make projected painting
· Paint metal and wood
· Do masonry work
C. Plumbing Training
1st year:
After 1st year of Plumbing Training, the students will be able to:
· Use plumbing tools and materials
· Prepare working place
· Read technical construction and plumbing drawing
· Use catalog of plumbing equipments
· Install sanitary equipments: WC, urinal, washing sink…
· Install drainage system
· Install water supply system
· Make water ditch
· Install all kinds of siphons
2nd year
After 2nd year of Plumbing Training, the students will be able to:
First semester
· Connect pipes PP-R and PE
· Calculate pipe’s section for train drainage
· Install pressure reducing valve or detender
· Install washing machine
· Install modern sanitary fittings in bathroom ( by using hot water system )
· Install hot water system
· Install hot water system using solar system
V. Course Curriculum
All students must spend one year in preparatory class to study the foundation for training orientation, general knowledge and professional behavior for their long-life career. The programs of the general classes are not only important for foundation class, but also necessary for supporting specific courses. The Construction School provides students continuous knowledge of Khmer, Math, Computer, and English every yearly academic program since they are deemed compulsory for each level of Construction School.
1. Subjects of Study
1st year program
English ................................................................. 10 hours per week
Technical Modules ................................................ 22hours per week
Mathematics........................................................... 5 hours per week
Khmer ................................................................... 4 hours per week
Computer .............................................................. 2 hours per week
Social & Professional Life (SPL)........................... 2 hours per week
Professional Life Training (PLT)............................. 1 hour per week
Self study .............................................................. 4 hours per week
Total study hours ............................................ 50 hours per week
2nd year program
English ................................................................. 10 hours per week
Technical Modules .............................................. 22 hours per week
Mathematics........................................................... 5 hours per week
Khmer ................................................................... 2 hours per week
Social & Professional Life (SPL)........................... 2 hours per week
Professional Life Training (PLT)............................. 1 hour per week
Self study ............................................................. .8 hours per week
Total study hours ............................................ 50 hours per week
2. Technical Module
Name of the course: Technical Modules
Electricity Trainer: Mr. SONG Mongtray, Mr. HOK Thyleang
Tiling and Painting Trainer: Mr. HIN Saohon, Mr. KIM Socheath
Plumbing Trainer: Mr. HIM Da, Mr. KOUCH Naravy
Number of hours: 22 hours per week
Attending class: Construction School: Electricity Training, Tiling and Painting Training, Plumbing Training
Evaluation: Monthly exam, Practical exam, Quiz, Semester exam, Class participation, Homework
Technical Modules for First Year Program
Common Core Syllabus (CCS: 3months)
Electricity Modules
Tittle of Modules
Module
Duration
Objective of lesson
Unit1: Work safety
Lessons:
1. Safety equipments
2. Danger of electrical shock
3. Protection against electrical shock
4. Electrician’s tools and equipments
10h
At the end of the unit the students will be able to:
· Use safety equipments and identify each equipment’s role
· Know how to rescue people from electrical shock
· Know the importance role of grounding system
· Know the importance of lightning protection system
· Identify personal and common equipments
Unit2: Electrical materials
Lessons:
1. Electrical materials
2. Product brand names
3. Products’ information and specification
4. Electrical circuit
At the end of the unit the students will be able to:
· Differentiate between safety and decorative equipments
· Identify equipments’s brand names
· Identify manufacturers and equipments’ specification
· Recognize electrical circuit
Unit3: Electrical enterprises
Lessons:
1. General information on electrical enterprises
2. Electrician’ roles in enterprise
3. Different kind of work sites
4. Dealing with different kinds of situations for electrical installation
5. Occupation as an electrician
At the end of the unit the students will be able to:
· Define different kinds of electrical enterprises.
· Citing electrical work at different work places.
· Install electrical system in various circumstances: above ceiling, in brick wall, in bathroom...
· Identify various power sypply occupations
· Install new electrical system and do the maintenance of old system
Unit4: Electrical drawings and symbols
Lessons:
1. Floor plan
2. Different kinds of drawings
3. Introducing scaled drawing
4. Electrical symbols
17h
At the end of the unit the students will be able to:
· Describe floor plan
· Describe elevation
· Recognize scale in drawing
· Identify various symbols in drawing
Unit5: Electricity distribution and connection
Lessons:
1. Electricity distribution in building
2. Single diagram
3. Selecting conduit and accessories
4. Mono-phase 220V and tri-phase 380V current
5. Installing electrical system in different situations
6. Inspecting connection in circuit
22
At the end of the unit the students will be able to:
· Identify main cable
· Read single diagram
· Select suitable conduits and accessories
· Install mono-phase and tri-phase system
· Install electrical system in wall and under floor...
· Reading electrical circuit
Tiling and Painting Modules
Tittle of Modules
Module
Duration
Objective of lesson
Lessons:
1. Local enterprises
2. Painter’s equipments and tools
3. Using putty knife
4. Geometrical shapes
5. Tiling
6. Using sand paper
7. Using paint brush
8. Using roller
9. Tile layer’s tools and equipments
10. Introduction to painting
11. Laying wall tiles
12. Using mortar
13. First coat painting
14. Drawing symbols
15. Ladder and scafolding
16. Understanding elevation
17. Using safety equipments and signs
18. Reading drawing
19. Painter and tile layer’s occupation
20. Understanding work site
21. Installing equipments
At the end of the unit the students will be able to:
· Describe about local enterprises
· Identify painter’s equipments and their roles
· Recognize geometrical shape in a complex drawing
· Prepare work site for tiling
· Identify and use various sand papers
· Identify and use various paint brushes
· Identify and use various rollers
· Identify and use tile layer’s tools and equipments
· Relate painting work
· Lay wall tile
· Mix and use mortar
· Apply first coat
· Recognize symbols in drawing
· Use ladder and scafolding
· Recognize drawing’s elevation
· Recognize signs and use safety equipments
· Read related technical drawing
· Relate painter and tile layer’s occupation
· Identify work site
· Install equipments
Plumbing Modules
Tittle of Modules
Module
Duration
Objective of lesson
Unit1: Overview of Plumbing Training
Lessons:
22. Introduction to plumbing
23. Pipes and embeded devices installation
24. Related skills
25. Selecting soldering method
21h
At the end of the unit the students will be able to:
· Describe plumbing work
· Install and connect pipes and embed pipes
· Identify various related skills
· Select suitable soldering method and solder iron, copper and bronze
Unit2: Drawing and Scaling
1. Reading drawing
2. Understanding scale
3. Identifying and using objects for drawing
15h
At the end of the unit the students will be able to:
· Identify various objects in the technical drawing such as door, window, stair, lavatory, sink, toilet...
· Read the related technical drawings.
Unit3: Plumbing Tools and Materials
1. Security equipments and materials
2. Tools and equipments used at site
3. Different kinds of plumbing fixtures
4. Accessories of plumbing fixtures
5. Related tools and equipments
6. Using simple leveling tool
7. Different kinds of pipes
8. Plumbing equipments
9. Taking care of equipments after use
48h
At the end of the unit the students will be able to:
· Use safety tools.
· Read and recognize various warning signs at site
· Recognize various kinds of plumbing fixtures
· Recognize accessories of plumbing fixtures
· Identify tools and equipments used for plumbing.
· Recognize other related tools and equipments.
· Use simple leveling tool correctly
· Identify different kinds of pipes
· Recognize serveral kinds of plumbing equipments
· Take care of their tools and equipments after working.
Final exam
4h
Total
88h
Electricity Year1 (E1: 8months)
Tittle of Modules
Module
Duration
Objective of lesson
Unit1: Safety Tools
Lessons:
1. Introducing safety eqipments
2. Safety measures
At the end of the unit the students will be able to:
· Use safety equipments correctly
· Take measures for safety at work place
Unit2: History and origin of electricity
Lessons:
1. History of electricity and its origin
2. EDC and its missions
3. Different sources of electricity
4. Electricity distribution
10h
At the end of the unit the students will be able to:
· Relate the history of electricity and its origin
· Talk about EDC and its mission
· Identify different sources of electricity
· Relate the distribution of electricity from source to receiver
Unit3: Principle of electricity and measurement
Lessons:
1. Priciple of Ohm law
2. Potential law
3. Voltage measurement
4. Electrical circuits
5. Measurement of electrical current
6. Electrician’s measurement tools
7. Using measurement tools
8. Measuring tri-phase 380V current
9. Measuring and reading
10. Electrical measurement
At the end of the unit the students will be able to:
· Recognize Ohm law and do the calculation using Ohm law
· Recognize potential law and do the calculation using potential law
· Measure AC DC tension, resistance and intensity using Ohmmeter
· Install parallel, series and mix resistance in a circuit
· Solve the formular of each circuit
· Calculate the resultant resistance of each circuit
· Use Multimeter
· Use Multimeter in a series with source of electricity
· Use analog Multimeter
· Use digital Multimeter
· Read Ammeter and Voltmeter
Unit4: Electrical drawing and catalog
Lessons:
1. Create scaled drawing
2. Introducing catalog
3. Finding electrical equipments in the market using catalog
At the end of the unit the students will be able to:
· Create scaled drawing and finding actual distance using drawing
· Identify objects in catalog and in the market place
Unit5: Drilling and cutting machine
Lessons:
1. Drilling machine
2. Cutting machine
3. Drilling wood
4. Drilling steel
5. Demolition hammer
At the end of the unit the students will be able to:
· Use drilling machine
· Use cutting machine
· Drill wood
· Drill steel
· Use demolition hammer
Unit6: Installing and cutting flexible and rigid conduits
Lessons:
1. Installation of equipments
2. Cutting PVC box
3. Junction box
4. Installing conduits and simple lighting fixtures
5. Cable connection
6. Running cable
7. Socket outlet and switch
8. Mono-phase distribution board
9. Tri-phase distribution board
10. Timer
11. Embeding cables
12. Maintenaince
At the end of the unit the students will be able to:
· Install socket outlet and switch box
· Cut PVC pipes correctly
· Use junction box
· Install conduit and simple lighting fixtures
· Connect electrical cables correctly
· Run electrical cables in conduits
· Install socket outlet and switch
· Install mono-phase distribution board
· Install timer
· Embed cables
· Maintain electrical system
Unit7: Cable and cable section
Lessons:
1. Introducing cables
2. Cable section and intensity
3. Two-way switch
4. Relay
At the end of the unit the students will be able to:
· Indentify different kinds of cables and their use
· Select suitable cable section
· Recognize the circuit and install two-way switch
· Install relay
Unit8: Safety and electrician’s tools
Lessons:
1. Circuit breaker and fuse
2. Cable protection materials
3. Personal tools
4. Common tools and equipments
5. Electrician’s tools
6. Maintenance of tools and equipments
At the end of the unit the students will be able to:
· Install fuse and circuit breaker
· Use cable protection materials
· Identify and use personal tools and equipments
· maintain tools and equipments
Unit9: Grounding and Voltage
Lessons:
1. Grounding system installation
At the end of the unit the students will be able to:
· Install grounding system
Unit10: Receivers and Accessories
Lessons:
1. Receivers
2. Accessories
3. Installation of electricity in bathroom
4. Cooperation with plumber
At the end of the unit the students will be able to:
· Install receivers and recognize each receiver’s role
· Install accessories
· Use safety equipments for electrical materials and human
· Cooperate with plumber
Final exam
Total
Tiling and Painting Year1 (T&P1: 8months)
Tittle of Modules
Module
Duration
Objective of lesson
Lessons:
1. Paint products
2. Different kinds of tiles
3. Before-painting tasks
4. Before-tiling tasks
5. Tiling equipments
6. Smoothing with sand paper before painting
7. Cleaning up after painting
8. Introduction to tile laying
9. Mixing prime coat powder
10. Applying prime coat and paint
11. Using mortar on rough surface
12. Mixing mortar for screeding and plastering
13. Mortar screeding
14. Cutting tiles
15. Repairing hair line, patch hole, and stain
16. Painting wood
17. Laying wall tile
18. Laying tile in bath room
19. Painting decorative items
20. Using resin paint for matt and glossy surface
21. Laying floor tiles in bath room
22. Laying wall tiles in bath room
23. Painting bath room wall
24. Painting ceiling
At the end of the unit the students will be able to:
· Identify paint products
· Identify diffenrent kinds of tiles
· Do before-painting tasks
· Do before-tiling tasks
· Identify and use tiling equipments
· Use sand paper to smooth surface
· Clean up after painting
· Describe tiling methods
· Mix prime coat
· Apply prime coat and paint
· Use mortar on rough surface
· Mix mortar for screeding and plastering
· Do mortar screeding work
· Cut tiles
· Repair hairline patch hole and stain
· Paint wood surface
· Lay wall tile
· Lay tile in bathroom
· Paint decorative items
· Use resin paint for matt and glossy surface
· Lay floor tile in bath room
· Lay wall tile in bath room
· Paint bath room wall
· Paint ceiling
Final exam
Total
Plumbing Year1 (P1: 8months)
Tittle of Modules
Module
Duration
Objective of lesson
Unit1: Review of CCS lessons
Unit2: Safety equipments and job safety
Lessons:
1. Tools used at site
2. Identify workplace
At the end of the unit the students will be able to:
· Identify the roles and functions of materials used at site.
· Recognize various signs at site
· Define working areas using signs
Unit3: Plan layout and sanitary installation (For simple bathroom and kitchen)
Lessons:
1. Reading drawing, scale and symbols
2. Using catalog
3. Hangers
4. Sanitary wares: sink, toilet, lavatory, bath tub, faucet...
5. Making ditch for ebbeding pipes
6. Slope for drainage
7. Ventilation and floor trap
8. Installation of showers and faucets
9. Sink installation
10. Washing machine installation
At the end of the unit the students will be able to:
· Read related technical drawings, identify scale and symbols in the drawing
· Identify equipments in the catalog and use to install those equipments
· Install hangers
· Install serveral sanitary wares: sink, toilet, lavatory...
· Running pipes in walls...
· Determine slope for drainage
· Install ventilation pipes and floor traps
· Install shower and faucets
· Install sink
· Install washing machine
Unit4: Installation of modern sanitary wares
Lessons:
1. Water pressure and flow
2. Pressure reducing valve (regulator)
3. Electric water heater system installation
4. Bath tub installation
5. Thermostat faucet
6. Safety at work for sanitary wares installation
7. Reparation and new installation
At the end of the unit the students will be able to:
· Calculate water pressure, velocity, and flow
· Define function of pressure reducing valve
· Install pressure reducing valve correctly
· Install cold and hot water pipe for sanitary wares
· Describe the working process of electric water heater
· Install electric water heater correctly
· Install water supply pipe and drainage
· Install bath tub correctly
· Define the role of Thermostat Faucet
· Calculate the quantity and temperature of cold and hot water
· Install Thermostat Faucet correctly
· Define safe working place for sanitary installation
· Creative and to know how to save ressources
Unit5: Metal soldering
Lessons:
1. Silver soldering
2. Electrical soldering
3. Oxyacetylen soldering
4. Selecting soldering methods
At the end of the unit the students will be able to:
· Solder silver
· Detemine heat level for diffent kinds of metal and thickness
· Use oxyacetylen soldering method
· Select suitable soldering methods
Final exam
Total
Technical Modules for Second Year Program
Electricity Year2 (E2: 8months)
Tittle of Modules
Module
Duration
Objective of lesson
Unit1: Installation of electrical equipments
Lessons:
1. Contactor
2. Installation of sensor
3. Installation of sensor using timer and light sensor
4. Calculation of linear tension loss in cable
5. Calculation of cable section relative to its lenght
6. Differential
22h+98h
At the end of the unit the students will be able to:
· Identify different kinds of contactors and their functions
· Install and identify the roles and functions of light sensor
· Calculate tension loss in cable
· Calculate cable section relative to its length
· Install differential system
Unit2: Safety and first aid
Lessons:
1. Safety measures
2. Danger of electrical shock
3. Fire extinguishing
4. Rescue people from electrical shock
10h+26h
At the end of the unit the students will be able to:
· Use and identify the roles and functions of safety equipments
· Take measures against electrical shock
· Extinguish fire caused by electricity
· Use first aid to help people from electrical shock
Unit3: Installation of electric motor
Lessons:
1. Principles of mono-phase motor
2. Connecting mono-phase motor
3. Selecting equipments for protection of motor
4. Selecting cable for use with motor
5. Installation of motor
14h+40h
At the end of the unit the students will be able to:
· Describe the principles of mono-phase motor
· Connect mono-phase motor and selecting its direction
· Select suitable cable for use with motor
· Install motor
Unit4: Tri-phase distribution board
Lessons:
1. Definition and characteristics of tri-phase tension
2. Measurement of simple and complex tension
3. Installation of tri-phase distribution board
4. Transformer
At the end of the unit the students will be able to:
· Describe the principles of tri-phase system and install it
· Measure simple and complex tention
· Install tri-phase distribution board
· Identify the roles of transformer and install it
Unit5: Installation of tri-phase motor
At the end of the unit the students will be able to:
· Install tri-phase motor
Unit6: Determination of departure current of tri-phase motor
Lessons:
1. Determination of departure current of tri-phase motor
2. Installing tri-phase motor using star or triangular method
3. Commanding tri-phase motor
4. Commanding two tri-phase motors simultanously using timer
At the end of the unit the students will be able to:
· Determine departure current of tri-phase motor and use Rheostat for normal departure current
· Install tri-phase motor using star or rectangular method
· Identify commanding circuit of tri-phase motor
· Command two motors simultanously using timer
Unit7: Safety Lamps
Lessons:
1. Different kinds of safety lamps
At the end of the unit the students will be able to:
· Identify different kinds of safety lamps and their roles
Unit8: Installation of emergency alarm
At the end of the unit the students will be able to:
· Identify different kinds of emergency alarms and their functions
· Install emergency alarms
Unit9: Installation telephone line, network and TV cable
At the end of the unit the students will be able to:
· Install telephone line, network and TV cable
Final exam
Total
Tiling and Painting Year2 (T&P2: 8months)
Tittle of Modules
Module
Duration
Objective of lesson
Lessons:
1. Laying wall tiles in bath room
2. Laying floor tiles in bath room
3. Spraying paint on metal suface
4. Practice laying tiles
5. Spraying paint for bump finish
6. Modifying surface with prime coat
7. Applying prime coat at corner
8. Laying decorative tiles
9. Laying wall tiles
10. Laying 10cm brick wall
11. Laying 2ocm brick wall
12. Installing doors and windows
13. Plastering
14. First color
15. Second color
16. Third color
17. Dark to light color
18. Light color
At the end of the unit the students will be able to:
· Layout and lay wall tiles in bath room
· Layout and lay floor tiles in bath room
· Spray paint on metal surface
· Lay tiles, cut tiles and calculate number of tiles
· Spray paint for bump finish
· Modify surface with prime coat powder
· Apply prime coat at corner
· Lay decorative tiles
· Lay 10cm brick wall
· Lay 20cm brick wall
· Install door and windows
· Plaster with mortar
· Identify first color
· Mix second color
· Mix third color
· Define dark to light color and color spectrum
· Mix light color
Final exam
Total
Plumbing Year2 (P2: 8months)
Tittle of Modules
Module
Duration
Objective of lesson
Unit1: Review of first year lessons
1. Sanitary installation in bathroom : pressure, speed, soldering, slope, section, surface, radius, units.
66
Unit2: Pipes and sanitary wares installation
Lessons:
1. Pipe section for appartment
44
At the end of the unit the students will be able to:
· Calculate section of water supply pipe of a flat
Unit3: Pressure
Lessons:
1. Height and pressure
2. Pressure reducing valve
3. Installation of water pump
68
At the end of the unit the students will be able to:
· Calculate water pressure, velocity, and flow
· Define function of pressure reducing valve
· Install pressure reducing valve correctly
· Select suitable pressure pump
Unit4: Fire fighting system
Lessons:
1. Practicing oxyacetylen soldering
2. Practice electrical soldering
3. Practice copper soldering
4. Selecting suitable pressure pumps
5. Installation and soldering iron pipes
6. Detecting leakage in firefighting system
62
At the end of the unit the students will be able to:
· Solder using and oxyacetylen method
· Use electrical soldering method
· Solder copper pipes
· Select suitable prssure pump for different situations
· Solder iron pipes for firefighting system
· Detect leakage in firefighting system
Unit5: Sensor installation
Lessons:
1. Thermostat faucet
2. Installation of lavatory sensor
3. Installation of hand drying machine sensor
4. Installation of urinal sensor
6
At the end of the unit the students will be able to:
· Define the role of Thermostat Faucet
· Calculate the quantity and temperature of cold and hot water
· Install Thermostat Faucet correctly
· Understand the role of lavatory sensor
· Install sensor
· Describe the role of hand drying machine
· Install hand drying machine technically correct
· Do the reparation and maintenance of hand drying machine
· Recognize the role of automatic urinal
· Install automatic urinal
· Do the reparation and maintenance of automatic urinal
Unit6: Electric water heater installation
Lessons:
Difference between heat and hot temperature
Installation of thermostat faucet and bath tub
Electric water heater installation
Solar system water heater installation
114
At the end of the unit the students will be able to:
· Differentiate between heat and hot water temperature
· Insatall supply and drainage pipe
· Install cold and hot water supply pipes
· Install bathtub
· Describe the working process of electric water heater
· Install electric water heater technecally correct
· Analyse the structure of solar panel
· Describe the working process of solar panel
· Install solar panel
· Do the reparation and maintenance of solar panel
Unit7: Water filtration
Lessons:
Softening and sterilizing using chloral
Softening and sterilizing using ion
Purifying by using PH, TH, UV
Installation of water filter
106
At the end of the unit the students will be able to:
· Soften and sterilize water using chloral
· Soften and sterilize water using ion
· Purify water using PH, TH, and UV
· Install water filter
Unit8: Irrigation system and used-water drainage system
Lessons:
Installation of rain water drainage system
Installation of irrigation system
Public water system installation
Installation of water sprinkler nozzle
Used-water filter installation
172
At the end of the unit the students will be able to:
· Calculate coverage area and install rain water drainage system
· Install sprinkler by identifying initial water pressure and nozzle of simple and automatic sprinkler
· Install public water system
· Identify the components of sprinkler nozzle
· Install sprinkler
· Install used water filter
Total
Mathematics
Name of the course: Mathematics
Professor in charge: SO Sarom
Number of hours: 5 hours per week, 182 hours in year 1; 4 hours per week, 170 hours in year 2
Attending class: Mechanic School, Vehicle Maintenance Training
Evaluation: Monthly exam, Quiz, Semester exam, Class participation, Homework
Course description:
The Mathematics class is one of the major subjects taught to all the students of Construction School. First it reviews the mathematics basic before applying these simple rules to the reality of the Mechanic and Vehicle industry. The summary and the objective of the course are listed in the table below.
Mathematics Modules
Mathematics Year1
Tittle of Modules
Module
Duration
Objectives of lessons
Unit1: Multiplication table
Lessons:
Multiplication table number 2 to number 9
At the end of the unit the students will be able to:
· Cite multiplication table from number 2 to number 9
Unit2: The four operations
Lessons:
The four operations on whole number, fraction, and decimal
At the end of the unit the students will be able to:
· Use the four operations with whole number, fraction and decimal
Unit3: Three statements method
Lessons:
Three statements method and proportion
At the end of the unit the students will be able to:
· Use three statements method
· Calculate proportion
Unit4: Converting units
Lessons:
Converting length, area, mass, and volume
At the end of the unit the students will be able to:
· Convert length, area, mass, and volume unit
Unit5: Polygon and circle area
Lessons:
Calculate polygon and circle area
At the end of the unit the students will be able to:
· Calculate the area of rectangular, square, parallelogram, rhombus, triangle, trapezium, and circle
Unit6: Volume of solids
Lessons:
Calculate volume of right parallelepiped, cylinder, cone, truncated cone and pyramid
At the end of the unit the students will be able to:
· Calculate the volume of right parallelepiped, cylinder, cone, truncated cone and pyramid
Unit7: Weight
Lessons:
Calculate car weight
At the end of the unit the students will be able to:
· Define weight and calculate car weight
Unit8: Pressure
Lessons:
Water pressure
At the end of the unit the students will be able to:
· Define pressure and calculate water pressure
Unit9: Lever
Lessons:
Lever
At the end of the unit the students will be able to:
· Calculate moment and force using stable condition of lever
Unit10: Water velocity and flow
Lessons:
Velocity and flow
At the end of the unit the students will be able to:
· Calculate water velocity and flow
Final exam
Total
Mathematics Year2
Tittle of Modules
Module
Duration
Objectives of lessons
Unit1: Percentage
Lessons:
Calculate percentage
At the end of the unit the students will be able to:
· Caculate gain and loss as percentage
· Calculate buy-in and sell-out cost
· Caculate increase rate as percentage
· Calculate drop rate as percentage
Unit2: Power and square root
Lessons:
Power
Square root
At the end of the unit the students will be able to:
· Define power
· Calculate power
· Caculate square root
Unit3: Output and work
Lessons:
Electrical output
Water output
Tiling, painting, and mortar mixing output
At the end of the unit the students will be able to:
· Calculate electrical output
· Calculate water output
· Caculate tiling, painting and mortar mixing output
Unit4: Currency and exchange rate
Lessons:
Riel
Dollar
Exchange Dollar to Riel
Exchange Riel to Dollar
At the end of the unit the students will be able to:
· Identify Riel currency
· Identify dollar currency
· Exchange Dollar to Riel and Riel to Dollar
Unit5: Billing
Lessons:
Reading bills
Writing bills
Sum bills
At the end of the unit the students will be able to:
· Read bills
· Write bills
· Sum bills
Unit6: Interest rate, loan amount and loan duration
Lessons:
Interest rate
Loan amount
Loan duration
At the end of the unit the students will be able to:
· Calculate interest rate
· Calculate loan amount
· Calculate loan duration
Unit7: Equation related to water pressure, required amount and construction materials supply
Lessons:
Integer
Operations on integer
Algebraic expressions
Simple equation with one variable
Solving problem of simple equation with one variable
At the end of the unit the students will be able to:
· Identify integer
· Do operations on integer
· Calculate algebraic expressions
· Identify simple equation with one variable
· Solve simple equation with one variable
Unit8: Inertia and buoyant force
Lessons:
Inertia
Buoyant force (Archimedes)
At the end of the unit the students will be able to:
· Indentify inertia state
· Calculate buoyant force
Unit9: Bending moment and mechanical output
Lessons:
Bending moment
Mechanical output
At the end of the unit the students will be able to:
· Calculate bending moment
· Calculate mechanical output
Unit10: Hydraulic pressure
Lessons:
Hydraulic pressure
Exercises on hydraulic pressure
At the end of the unit the students will be able to:
· Calculate hydraulic pressure
· Solves problems related to hydraulic pressure
Final exam
Total
3. Khmer
Name of the course: Khmer
Professor in charge: SAY Chenda
Number of hours: 4 hours per week, 145 hours in year 1; 2 hours per week, 63 hours
Attending class: Mechanic School, Vehicle Maintenance Training
Evaluation: Monthly exam, Quiz, Semester exam, Class participation, Homework
Khmer Module
Khmer Year1
Tittle of Modules
Module
Duration
Objectives of lessons
Unit 1:
Lessons:
1. Reading: Virak, my friend. ( Khmer language book, grade 7, pages 135)
2. Lecture and its meaning ( Grade 7 book, pages 4)
3. Introduce someone to other ( Grade 6 book pages 11)
4. Write out the paragraph for introducing one’s self (Grade 8 book)
5. Complete the curriculum vita
6. Latter of birth paper request
7. Birth confirmation paper
8. Visa request (Grade 12 book, pages 80)
9. Promise paper of bike and helmet borrowing
10. Dictation
23h
At the end of the unit the students will be able to:
Use words to describe and analyze the model person.
Read and identify several words and their meaning and use.
Introduce himself to others
Complete some administrative documents related to their own information
Unit2
Lessons:
Reading: The Mars (Grade 10 book, pages 260)
Using the words for describing ( Grade 7 book, pages 31)
Describing the activities of a holiday (re-entry day)
1. Composing the describing text
2. Studying the text served as model.
3. Application exercise on describing a event
Dictation
14h
At the end of the unit the students will be able to:
Compose and describe text by using interesting terminological words.
Analyze the use of descriptive words.
Describe the activities of an event
Unit3
Lessons:
General nature of information (information’s elements)
Plan of one information’s text
Writing the information’s text
Reading the advertisement ‘s text
Writing the CV (curriculum vita)
Dictation
19h
At the end of the unit the students will be able to:
The students are able to read the information’s text and select the important points of information.
The students are able to write the information’s text.
The students are able to conduct their CV.
Unit4
Lessons:
Reading: Driver, Sim (grade 9 book, pages 276)
Positive and negative person ( grade 9 book, pages 275)
Conducting the report of visit:
4. Essaying to write the report
5. Verify the report with model report
6. Plan of report
7. Application of conducting the report
Dictation
13h
At the end of the unit the students will be able to:
Point out the important event in the text:
8. Develop the spirit of human rights respect.
Point out the positive and negative person:
-Analyze correctly the characteristics of the characters in the story.
Write their daily or semester activities report.
9. The students do their presentation in Khmer.
Unit5
Lessons:
Reading: Prevention’s choice of HIV/AIDS(Grade 11 book, pages 140)
Explanative composition :
10. Proverbs on jobs (Khmer book, grade 11, pages 21)
11. Trying to write down
12. Verifying with the model
13. Plan
14. Application exercise
Dictation
14h
At the end of the unit the students will be able to:
Describe the preventive methods against HIV/AIDS.
15. Take care of AIDS patients.
Express their ideas through speaking and writing.
Unit6
Lessons:
1. Reading: phone’s history ( Grade 9 book, pages 198)
2. Small detail ideas supported the major ideas ( pages 76)
3. Personal interview providing: directly or by phone) (Book grade 10, pages 49)
4. Postcard
5. Wishes letter
6. Thanks letter
7. Congratulation letter
8. Condolence letter
-With 5 kinds of latter above, the students are permitted to try to write them out, study the models and do the applicative exercise.
9. Dictation
31h
At the end of the unit the students will be able to:
Identify the advantages of education.
Find out the correct information via contents
Describe their experiences.
Write wish, thank, congratulation and condolence letter
Be able to do rightly the communication through speaking, gesture and writing.
Unit7
Lessons:
Reading: Robot ( Khmer book grade 10, pages 289)
Talent: Estimation’s event ( Grade 7 book, pages 99)
Promise of renting house
Promise of transmission land
Export and import letter
Invoices
Receive and delivery letter
Dictation
18h
At the end of the unit the students will be able to:
Show extra activities of human: analyze the science ‘s wonderfulness
Estimate events with the importance of lessons
Be able to complete several kinds of letters
Unit8
Lessons:
1. Lecture: The manner of European Community’s Economy (Khmer book, grade 12, pages 92)
2. Talent: The meaning of figurative words (pages 114)
3. Excuses words: ( Grade 6 book, pages 56)
4. Excuse letter grade 60 book, pages 6)
5. Dictation
12h
At the end of the unit the students will be able to:
Confirm economical issues.
Mark the important points in the text
Interpret graphic
Analyze and interpret bar chart
Write bar chart
Final exam
Total
Khmer Year2
Tittle of Modules
Module
Duration
Objectives of lessons
Unit1
Lessons:
Lecture: Wonderful engine (Grade 11 book, pages 139)
Talent: Meaning the words (Grade 11 book, pages 136)
Speaking: Report on vehicle’s maintenance (Grade 11 book, pages 148)
Writing: Simple report on meeting to define automobile’s repairing method (Grade 11 book, pages 149)
12h
At the end of the unit the students will be able to:
Describe the development of science and technology through writing and speaking
Explain the meaning of transformative words.
Use transformative words.
Do oral report
Write the report
Unit2
Lessons:
1. Reading: work’s conscience (Grade 11 book, pages 11)
2. Talent: Conflict (Grade 12 book, pages 3)
3. Speaking: Verbal report ( Grade 12 book, pages 18)
4. Simple research repot’s writing (Grade 8 book, pages 19)
11h
At the end of the unit the students will be able to:
The students are able to confirm the work’s conscience.
The students are able to verbally report and do research report‘s writing.
Explain the conflict in the story
Analyze external and internal conflict.
Explain the verbal report: Arrange speaking with introduction, development and conclusion.
Conduct the simple writing report :
Analyze and use correctly the words.
Unit3
Lessons:
1. Reading: future’s plan (Grade 12 book, pages 29)
2. Talent: Do phrase’s plan (Grade 7 book, pages 119)
3. Speaking: Conduct plan and show desire ( Grade 12 book, pages 35)
4. Writing: Plan ‘s writing (Grade 12 book, pages 36)
11h
The students are able to speak and write their future’s plan.
Explain their plan and intention
Analyze the plan’s writing
Unit4
Lessons:
1. Reading: Elevate solidarity in work ( Grade 12 book, pages 105)
2. Talent: Relation between reason and event (Grade 7 book, pages 166)
3. Speaking: Express opinions (Grade 12 book, pages 47)
4. Writing the personal opinions (Grade 12 book, pages 50)
10h
The students are able to increase the s solidarity in work:
5. Analyze the application’s factors for getting along.
Explain the relation between reason and event of getting along and conflict.
Explain the value of morality through action.
The students are able to express their opinions via speaking and writing.
Explain the opinion supporting the topic.
Unit5
Lessons:
Reading: The famous polishing gem’s region of the World (Grade 10 book, pages 47)
Talent: Identifying the alliance’s sign: point, etc… (Grade 10 book, pages 166)
Listening: Creating the vapor engine (Grade 10 book, pages 295)
Promise’s writing (Grade 12 book, pages 65)
10h
Identify the meaning of difficult words in the phases.
Identify the important detail points
Acknowledge and identify the meaning of alliance’s signs.
Explain the importance of research.
Be able to conduct the promise latter.
Unit6
Lessons:
1. Reading: Science and conscience (Grade 12 book, pages 221)
2. Speaking: Discussion (Grade 12 book, pages 221)
3. Discussing composition’s writing (Grade 12 book, pages 222)
8h
Explain the conscience of scientist.
The students are able to exchange their opinion.
The students are able to conduct the discussing composition
Final exam
Total
4. Computer
Name of the course: Computer
Professor in charge: CHAP Sophal
Number of hours: 2 hours per week, 80 hours in 1 year
Attending class: Vehicle Maintenance Training
Evaluation: Monthly exam, Quiz, Semester exam, Class participation, practice
Course description:
The computer class is one of the major subjects of Design layout taught to all the students of the Agriculture school when they need for design plan or reports.
Objectives:
At the end of the computer class, the student will be able to:
1. Apply fundamental of computer.
2. Mario typing
3. Apply Fundamental of Microsoft Office Word 2007
4. Store files and open files
5. Create new folder
6. Type text in English in Microsoft Office Word 2007
7. Alternate keyboard between Khmer Unicode and English.
8. Create table in Microsoft Office Word 2007
9. Print
10. Use internet and email
Computer Year1
Tittle of Modules
Module
Duration
Objectives of lessons
Unit1: Fundamental of of Computer
Lessons
1. Hardware
2. Software
3. Turning computer on
4. Start menu
5. Using mouse
6. Using key board
7. Turning computer off
8h
At the end of the unit the students will be able to:
Describe the fundamental of hardware and software
Turn computer on and off
Use start menu
Use mouse and keyboard
Unit2: Mario typing
Lessons
1. Open Mario typing
2. Function of keyboard
3. Adjust keyboard
4. Type in English up to 20-25WPM
5. Turn off Mario typing
10h
At the end of the unit the students will be able to:
Turn Mario typing on and off
Identify function of keyboard
Adjust keyboard
Type English words up to 20-25wpm
Unit3: Fundamental of Microsoft Office Word 2007
Lessons
1. Open Microsoft Office Word 2007
2. Window of Microsoft Office Word 2007
3. Type English text in Microsoft Office word 2007
4. Turn off Microsoft Office Word 2007
5h
At the end of the unit the students will be able to:
Turn Ms. word 2007 on and off
Identify window of Ms. word 2007
Type English words up in Ms. word 2007
Unit4: Saving and opening files
Lessons
1. Enter data in English
2. Save files in My Document, Drive D & server
3. Open files from My Document, Drive D & server
4. Identify extension of Word 2007
5. Cut, Copy, past and format painter the text
6. Edit, Delete and rename files
6h
At the end of the unit the students will be able to:
Enter data in English
Save files
Open files
Recognize extension of Ms. word 2007
Cut, copy, past and format painter the text
Edit, delete and rename files
Unit5: Creating folder
Lessons
1. Create folder for storing files
2. Create folder in Window Explorer
3. Cut, Copy, past folder
4. Delete, Rename folder
4h
At the end of the unit the students will be able to:
Create folder
Cut, copy and past folder
Delete and rename folder
Unit6: Typing English text in Ms. Word 2007
Lessons
1. Determine Page Setup
2. Use Format Font
3. Use Format Paragraph
4. Determine and Adjust Tabs
5. Insert Picture
6. Insert Clip Art
7. Insert Shapes
8. Format Picture
9. Group Picture
10. Insert Word Art
11. Determine Header and Footer
12. Create Drop Cap
12h
At the end of the unit the students will be able to:
Set up page
Use format font
Use format paragraph
Adjust tabs
Insert pictures, clip arts, and shapes
Format picture
Group picture
Insert word art
Set up header and footer
Create drop cap
Unit7: Typing Khmer Unicode in Ms. Word 2007
Lessons
1. Define the function of keyboard
2. Adjust keyboard
3. Type text in Khmer in MS. Word 2007
4. Alternate keyboard between Khmer and English
5. Type in Khmer and in English
5h
At the end of the unit the students will be able to:
Define function and adjust keyboard
Type Khmer text in Ms. word 2007
Switch Keyboard from Khmer to English and vise versa
Type Khmer and English
Unit8: Create and modify table
Lessons
1. Create table
2. Delete table
3. Delete and insert row and column
4. Select column, row or cell in a table
5. Merge cell
6. Create table in cell
7. Split table in two parts
8. Use cell alignment
9. Convert from table to paragraph
10. Arrange data
11. Justify table
12. Define border and shading
12h
At the end of the unit the students will be able to:
Create and delete table
Delete and insert row and column
Select column, row and cell
Merge cell
Create table in cell
Split table into two parts
Use cell alignment
Convert from table to paragraph
Arrange data
Justify table
Define border and shading
Unit9: Print Ms. word 2007 document
Lessons
1. Print set up
2. Print document
6h
At the end of the unit the students will be able to:
Set up for printing
Print document
Unit10: Internet and E-mail
Lessons
1. Use internet
2. Create E-mail address
3. Send E-mail
4. Receive E-mail
12h
At the end of the unit the students will be able to:
Use internet and E-mail
Final exam
Total
Methodology:
Teacher demonstrations
Practical exercises
Theoretical exercises
5. Professional Life Training
Name of the course: PLT
Professor in charge: POCH Manith
Number of hours: 1 hour per week, 34 hours per year (32 hours of classes, 2 hours of exams)
Attending classes: Vehicle Maintenance Training
Evaluation: Monthly exam, Quiz, Class participation, practice
Course description:
This course is very important for all the students who are going to work with professional people in industry sectors or companies. The course aims at making the students adapt to the real professional work environment in term of communication and work attitude.
Objectives:
At the end of that course, the students will be able to:
q Perform general attitude, hygiene, to adapt working with professional people
q Communicate with people in public and special event
q Define the real problems and solve them
q Work independently and be self-confident
q Adapt to different environment in life
q Follow the professional working rule in their sector
q Use a Phnom Penh map
q Present him/her with professional people for working interview
q Write their CV, Cover letter, request and report etc.
Methodology:
Open conversations
Pictures
Maps
Transparencies
Newspaper articles
Magazine articles
Hotel documents
Academic documents
Role-plays
PLT for First Year Program
PLT Year1
Tittle of Modules
Module
Duration
Objectives of lessons
Unit1: PLT introdution
Lessons
1. Get to know students
2. Create the rule in Class
3. What is PLT?
4. Why students need to study PLT?
5. Advantage of study PLT
6h
At the end of the unit the students will be able to:
Introduce oneself and others
Create some rules in class
Describe PLT
Tell the advantages of studying PLT
Unit2: Rules
Lessons
1. Roles of PSE for students
2. Roles of students for PSE
3. PSE Rules
4. Rule at working places
5. Risks of not following the rules
6h
At the end of the unit the students will be able to:
Identify PSE’s roles for them
Identify their roles for PSE
Describe PSE rules
Recognize rules at work place
Recognize risks of not obeying the rules
Unit3: Using map and behavior of employer
Lessons
1. How to use map
2. Behavior of employer
3h
At the end of the unit the students will be able to:
Use Phnom Penh map
Identify behavior of employer
Unit4: How to become a good person/staff
Lessons
1. Be honest
2. Have good characteristics
3. Internship Preparation
4. Follow the rules or policies at work place
5. Smart and hard work
6. Understand team work
7. Effective communication
8. Be responsible for your job
9. Self improvement
10. Self motivation
9h
At the end of the unit the students will be able to:
Be honest
Show good characteristics
Prepare for internship
Follow the rules or policies at work place
Do smart and hard work
Recognize the benefits of team work
Indentify the benefit of effective communication
Responsible for their job
Motivated for self improvement
Motivated for their job
Unit5: How to write a CV
Lessons
1. Sample CV
3h
At the end of the unit the students will be able to:
Identify good sample CV
Unit6: Interview process
Lessons
1. Recruitment process
3h
At the end of the unit the students will be able to:
Prepare for interview
Unit7: Application form
Lessons
1. Filling an application form
2h
At the end of the unit the students will be able to:
Fill an application form
Unit8: Critical points
Lessons
2. Criticals points experienced by previous students
2h
At the end of the unit the students will be able to:
Prepare for critical moments in recruitment process
Final exam
Total
VI. Methodology
1. Teaching principles and Intentions
a) Teaching principles
The following teaching principles constitute the fundamental aspects which have to be taken into account when choosing the strategies and the means which will be used in order to reach the goals and objectives of the program.
· Make the trainees participate in an active way and be responsible for their training.
· Take into account the rhythm and the way of learning of each trainee.
· Take into account and reinvest the material learnt at school.
· Consider that the possibility of learning is strongly related to the strategies and the means used to achieve the goals of the program.
· Support the reinforcement and the integration of the techniques learnt.
· Focus on practical learning devices and projects adapted to the reality of the labor market.
· Communicate with the trainees in correct Khmer and use the appropriate technical terminology in English and sometimes in French.
· Seek as much as possible the collaboration of the work environment through company relationship and advisory board.
b) Teaching intentions
The teaching objectives encourage the trainers to intervene in a given direction each time a situation is appropriate.
These intentions are as follows:
· Develop professional ethics and the personal respect.
· Develop autonomy, initiative, and sense of responsibilities.
· Develop personal discipline, effective organizational method of work.
· Develop attention and concern of well-done work.
· Develop the sense of oral and written communication with clarity and precision.
· Develop the sense of saving material and energy.
· Develop the concern of carefully using the tools and equipments.
· Develop the concern of preserving and protecting the environment.
2. General Training Approach
The program is organized around competencies. PSE applies Student-Centered Approach to all its pedagogic sections. These were defined, each in particular, from the analysis of the professional tasks while taking into account of the general goals of the training by adapting to the specific training context of learning at PSE’s Vocational Training Center.
The modules are structured and articulated in an integrated training project which aims at exposing the trainees to his future profession. The systematic organization of competencies makes it possible to obtain an overall result which goes beyond training with isolated objectives. It allows in particular a harmonious progression from one objective to the other, an economy in the learning process since it avoids useless repetitions, and allows as well the reinforcement and integration of the study material.
3. Role and Functions of the Trainers
The role of the trainers must be adapted to the changes brought to the professional training. This adaptation is required, in particular in order to take into account a more efficient way of: A teaching method defined by objectives, individual rhythm and way of learning from the trainers, an increased responsibility of the trainees towards what they are learning.
In this context, the trainers must organize their teaching in order to supervise the trainees who may be at different stages of their training. In order to reach this goal, the trainers have to be able to deal with the following functions:
a) Planning and Preparation:
This function consists of locating the modules he is in charge of: using the “logogram”, modifying or completing, if need be, the operational objectives, thinking of and producing specific activities to these modules using the tables, coordinating learning activities of each trainee, distributing the working stations and necessary materials, arranging and working out learning, examination, corrective teaching and fulfillment activities.
b) Information and motivation
This other function consists of: locating the trainees with regard to the whole program and to each module, providing the useful data to make trainees understand what they have to do, emphasizing the importance and relevance of the methods learnt. The first module is meant to locate and stimulate the trainees with regard to their whole training. In addition, each trainer is supposed to provide, at the beginning of each training session and each important activity, the necessary required teaching materials.
c) Animation, Support and Orientation
It is here about:
· Guiding the trainees by reminding them of the objectives, the identification of preconditions and the formulation of indications about the activities which will be done.
· Creating a climate of confidence based on the respect of the people and their autonomy as well as on the clarification of the real stakes.
· Maintaining the interest of the trainees throughout their progression by suggesting interesting and diversifying activities, by a judicious choice of the level of difficulty, by the use of examples or practical exercises by repeating encouragements and an interest to the personal concerns of the trainees.
· Supervising the learning activities by the establishment of a flexible and effective system of accompanying the trainees. This will lead to the list of strong and weak points which will be used to assist the trainees with difficulty toward an adequate learning direction, examination, corrective teaching and enrichment activities.
· Providing clear and right explanation to the group and the individual.
d) Examinations
Lastly, the trainer must:
· Deal with the accompaniment mentioned before producing and using formative evaluation and final examination instruments
· Manage these instruments
· Use and deal with data for the formative examination
· Provide the data to obtain the qualification.
4. Formative Examination
Concept of competency
The professional training is centered on examinations of the competency that has been developed. In this respect, two important aspects are focused on: the mastering of the job and fundamental training.
The mastering of the job directly aims at the execution of the tasks, the realization of the activities and adequate application to work. It refers to concrete, practical skills which are directly useful for the exercise of a profession.
The fundamental training, as for it, aims at more important developments, which are adapted to potential situation in professional life, but which may as well go beyond the immediate framework of the practice of the job. It refers to general skills that might be applied to other tasks, other activities or other situations in one’s professional life, such as the understanding of underlying principles in technology. These skills might even be applied to other situations in one’s personal or social life (for instance, the competency to solve problems).
Objectives and roles
The formative examination could be defined as a process aiming at ensuring a constant progress in the training stated in the programs of studies. Its purpose is to guide the trainee in his progress by continuously providing him with information about the evolution of the things he is learning. The formative examination is characterized by its integration to the teaching and learning processes. It also tends to support the progression of the trainees who will be able to reach their best performances. Moreover, the formative examination fulfils a diagnostic function in the sense that it gives the trainer and the trainee the opportunity to recognize the difficulties which emerge during the training. It thus makes it possible to point out their causes. Lastly the formative examination also has a function of enrichment because it makes it possible to quickly detect the trainees who need an extra activity in order to perfect certain techniques or simply to carry out other ones.
15th July 2010
